Question 1

An application is being load balanced through the LTM device using the configuration displayed below.

The network has been re-engineered to NAT all client connection. As a result, all client connections are hitting the same pool member.

Other-Image-4401f5183-2bb7-4027-a7be-479f8930a09a

Which changes should the LTM Specialist make in order to restore load balancing functionality wile maintaining session persistence?

Options :

A : Change the virtual server type to Standard, add an http profile, and change the persistence profile to Destination Address

B : Leave the virtual server type set Performance (Layer 4) and change the persistence type to hash

C : Change the virtual serer type to Forwarding (Layer 4) and leave the persistence type to hash source Address

D : Change the virtual server to Standard add an http profile, and change the persistence profile to Cookie persistence

Answer: D

Question 2

The network team introduces a new subnet 10.10.22.0/24 to the network. The route needs to be configured on the F5 device to access this network via the 30.30.30.158 gateway.

How should the LTM Specialist configure this route?

Options :

A : Tmsh modify net route 10.10.22/24 gw 30.30.30.158

B : Tmsh create net route 10.10.22/24 gw 30.30.30.158

C : Tmsh changey net route 10.10.22/24 gw 30.30.30.158

D : Tmsh add net route 10.10.22/24 gw 30.30.30.158

Answer: B

Question 3

Exhibit.

An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site. The VS HTTP passes the client requests to the webservers. The webservers query the database servers through the VS_DB. Initially, the LTM Specialist finds the database servers directly return the packets to the webservers.

which setting must be enabled for the configuration to function correctly?

Options :

A : VS_HTTP snat auto map

B : VS.HTTP auto last hop

C : VS DB auto last hop

D : VS_DB snat auto map

Answer: C

Question 4

An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.

Which step should the LTM Specialist take to meet this requirement?

Options :

A : use an iRule to change the output of the report

B : export the report and add the department names manually

C : create VLANs for each subnet and set the name accordingly

D : define active subnets and assign a name to certain subnets

Answer: C

Question 5

A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN

Which TMOS command enables this behavior?

Options :

A : tmsh modify net van External failsafe enabled

B : tmsh create sys ha-group External trunks add Externally

C : tmsh create sys ha-group External trunks add External threshold 2 weight 101)

D : tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))

Answer: C

Free 301a Mock Exam – Practice Online Confidently

Buying Options: