Question 1

Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE

Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb

SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third

fabric.

What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

Options :

A : A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.

B : For Brocade switches, a logical interconnect group must be created in HPE OneView.

C : For VC-FC modules, all of server facing ports must be property licensed.

D : SAS switches must be moved to second fabric and FC modules Installed in the first one.

Answer: D

Question 2

You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was

configured with a Link Aggregation Group

What should you check to fix the issue?

Options :

A : if both FiexNICs are configured with the same speed

B : If the logical enclosure is built on at least three HPE Synergy frames

C : if both FiexNICs are connected to different networks

D : if the logical enclosure is configured with redundant master modules

Answer: A

Question 3

Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView

for VMware vCenter Server.

Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

Options :

A : HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality

B :

Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor

C :

HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server

D :

Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

Answer: B

Question 4

Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules. Which statement about mixing different FLM modules is true?

Options :

A : Existing 2-port FLM modules must be replaced with 4-port FLM modules

B : A management ring can contain mixed frame link module configurations

C : A management ring with mixed FLM modules cannot have more than 12 frames

D : Mixing different FLM modules is allowed if all of them have the same firmware version

Answer: B

Question 5

Your customer experienced some problems caused by outdated HPE Superdome Flex firmware. Which update method should they use to avoid these issues in the future?

Options :

A : HPE OneView method for I/O firmware update procedure

B : RMC CLI to update I/O and HPE Persistent Memory firmware

C : HPE OneView IT HPE Persistent Memory firmware must be updated.

D : HPE SUM if HPE Persistent Memory firmware must be updated

Answer: D

Free HPE0-S59 Mock Exam – Practice Online Confidently

Buying Options: